How to Change Oil in a Car Efficiently

car engine

The engine of a vehicle is just like a kid and the owner of the vehicle the parent. It should be taken care of. When the engine is not taken care of, it would easily break and would cause lots of problems to the acting parent – the owner. For instance, it is imperative that the engine oil is checked regularly. This is because it plays a huge role in the function of the engine. It cleans the wear particles of the engine, increases the lubrication which reduces friction and in turn balances the temperatures inside the engine.

car engine
It is imperative that the engine oil is checked regularly.

Experts suggest that the engine oil should be changed after the car has covered a particular measurement of distance. Usually, engine oils would be changed after a 5,000-mile run or less. Taking your car to a mechanic can sometimes be taxing and costly, that’s why every owner should know how to change the oil in a car. It would be wise for you to know how to do this because when the time comes, you will say to yourself that getting the engine oil changed at a shop is indeed costly. So if you want to know how to do it, here’s a guide for you to know how to change the oil in a car.

Gather Round the Necessary Tools and Warm the Engine

The very first thing to do here is to gather the necessary tools. It would be careless if you start draining the oil from your engine immediately. After gathering the necessary tools, you should then start the engine. This has sparked numerous debates but this has been scientifically proven to be effective. The oil needs to warm before it is drained so that all the old oil will be eradicated from the engine.

Remove the Plug and Oil Filter

The next step is to remove the plug as well as the oil filter. When you remove the oil filter, you should be confident that you also remove the rubber band around it because if you don’t then the new filter would not fit in quite well and your oil would eventually leak. This is a common mistake which most people commit so you ‘d better focus when you do this.

Draining the Oil and Pouring in the New One

driving
The last thing to do is to make sure that there is enough oil in your engine.

After successfully removing the plug and filter, you proceed to drain the oil. When all the old oil is out, it’s time to pour in the new one. Be careful not to spill the old and new oil on your car or garage because it could leave unwanted stains.

Warm the Engine and Make Sure the Oil Meter is Up

The last thing to do is to make sure that there is enough oil in your engine. This is easy because all you have to do is start the car and observe the oil meter. There you have it. Now you know how to change the oil in a car with ease. Don’t be distracted when you do this for you to avoid unnecessary accidents.

Vehicle Performance And Tuning

car driving

The engine of the modern car has evolved significantly over the years from the internal combustion machine that was developed by Henry Ford. Today’s engines are far more complex, and a car’s Engine Control Unit (ECU) plays an important role in vehicle performance and tuning for the fuel injection system.

The Basics of the ECU

car engine
The ECU has the ability to control the major working parts of an engine.

The ECU is very sophisticated and uses microprocessors and sensor data to perform processes. Its firmware can be reprogrammed using computer code or by replacing a small microchip which governs the activity of the car through precise computer calculations.

Managing Speed

The amount of fuel that is put into the system determines its acceleration, and the ECU decides how much fuel will be released into the combustion chamber in a fuel injection system. Increasing airflow from the throttle causes the ECU to inject more gasoline. In cold weather, when the engine does not get warm enough, the ECU will compensate by supplying the engine with more fuel to allow the heat to increase.

ECU Sensors

The ECU uses mass airflow sensors to obtain necessary information to allow it to deliver the right amount of fuel to the engine. There are also other sensors that use data supplied by the ECU including the coolant temperature sensor, throttle position sensor and voltage sensor, which help the ECU adjust various functions, such as the operating temperature and system voltage.

The Advantages Of The ECU

bmw car
Deliver a high level of performance that makes driving a true pleasure.

The ECU is part of a highly developed engine management system that allows for better fuel economy and more responsive car performance. It is also environmentally- friendly, as it creates a lower amount of emissions from the vehicle. The ECU has the ability to control the major working parts of an engine and deliver a high level of performance that makes driving a true pleasure.